Products

Home >> Products >> Hot Melt Adhesive

Hot Melt Adhesive Used for Shoe

Product Details

CHARACTERISTICS

  • Good bonding strength and initial tack

  • Excellent low-temperature resistance

  • Excellent performance on film laminated materials


FIELDS OF APPLICATION

  • Widely used for bonding of auto, shoe, electronic device, toy, handcraft, external packaging, etc, especially for film laminated materials


TECHNICAL DATA   

Properties Specifications   Test Methods 
Main ingredientsEVA resin
ColorWhite and semi-transparent
FormStick-like solid
Softening point≥85℃ GB/T15332-1994
Peeling strength ≥80N/2.5cmGB/T2790-1995
Viscosity9000±2000 mPa·s(180℃)  HG/T3660-1999


PACKAGING

  • 25kgs/carton


APPLICATION METHOD

  • Hot melt glue gun(suggest power 60~80W), or melted in hot melt tank(suggest temperature 150~170℃) and then apply on the subject


INSTRUCTIONS FOR USE

  • Suggested working humidity >RH50%.


SHELF LIFE AND STORAGE CONDITIONS

  • Shall be stored in indoor, cool and dry place, avoid direct sunlight and constant high temperature

  • 2 years (sealed)


REMARK

These shown data is based on our knowledge and experience. This also applies to any third party property rights. Customers must check that the products are suitable for their processes and usage.