Products

Home >> Products >> Hot Melt Adhesive

Hot Melt Adhesive for Mouse Trap

Product Details

CHARACTERISTICS

  • Good initial tack and bonding strength

  • Good cohesion and weather-resistance

  • Strings appear if repeated sticking


FIELDS OF APPLICATION

  • Mainly used for making glue board mouse trap


TECHNICAL DATA   

Properties                      SpecificationsTest Methods
Main ingredientsPolyolefin
ColorYellow and transparent
FormRubber-like solid
Vertical flow temperature60℃
Viscosity1500±500mPa·s (120℃)HG/T3660-1999


PACKAGING

  • 5kgs/film bag, 4 bags/carton


APPLICATION METHOD

  • Hot melt coating machine, or by handwork after melting

  • Service temperature 120~140℃


INSTRUCTIONS FOR USE

  • Suggest to use hot melt machine with temperature control function;

  • Service temperature shall not ≥150℃;

  • Do not mix with glue from other suppliers;

  • Suggested glue spread 50~80g/m2.


SHELF LIFE AND STORAGE CONDITIONS

  • Shall be stored in indoor, cool and dry place, avoid direct sunlight and constant high temperature

  • 1 years (sealed)


REMARK

These shown data is based on our knowledge and experience. This also applies to any third party property rights. Customers must check that the products are suitable for their processes and usage.