Products

Home >> Products >> Hot Melt Adhesive

Air Filter Hot Melt Adhesive

Product Details

CHARACTERISTICS

  • Good flowability, short setting time

  • Good bonding strength


FIELDS OF APPLICATION

  • Assembly for air filter, especially for forming and bonding of filter elements 


TECHNICAL DATA   

Properties      SpecificationsTest Methods  
Main ingredientsEVA resin
ColorWhite
FormGranule solid
Softening point90±5℃GB/T15332-1994
Peeling strength ≥30N/2.5cmGB/T2790-1995
Viscosity1300±200 mPa·s(180℃)  HG/T3660-1999


PACKAGING

  • 25kgs/kraft bag


APPLICATION METHOD

  • Hot melt spraying machine

  • Service temperature 160±5℃


INSTRUCTIONS FOR USE

  • Suggest to use hot melt machine with temperature control function;

  • Service temperature shall not ≥180℃;

  • Do not mix with glue from other suppliers;

  • Suggested working humidity at RH50%±10%.


SHELF LIFE AND STORAGE CONDITIONS

  • Shall be stored in indoor, cool and dry place, avoid direct sunlight and constant high temperature

  • 2 years (sealed)


REMARK

These shown data is based on our knowledge and experience. This also applies to any third party property rights. Customers must check that the products are suitable for their processes and usage.